Primarily designed for capturing kick drums and bass guitar cabinets, the Sennheiser E902 excels in reproducing low frequency instruments with incredible richness and detail. The E902 features a dynamic element with a cardioid polar pattern. The dynamic element provides high headroom and low distortion when capturing signals at excessive sound pressure levels. The E902 responds to very fast attacks with extreme accuracy, without distortion. Low frequency response is optimized allowing the E902 to excel in reproducing kick drum, bass amplifiers, acoustic bass, tuba, timpani and much more.
Product Highlights
Transducer Dynamic
Polar Pattern Cardioid
Frequency Response 40Hz to 16kHz
Dynamic Range (Typical) not specified by manufacturer
Signal-to-Noise Ratio not specified by manufacturer
Maximum Input Sound Level not specified by manufacturer
Power Requirements None, dynamic element
Output Impedance Nominal (@ 1kHz): 350 ohms
Min. terminating: 1k ohms
Output Connectors 3-pin XLR male
Pad No
Low Frequency Roll-Off No
Dimensions 5.06 x 2.36" (128.5 x 60mm) (Length x Diameter)
Weight 15.52 oz (440 g)
Primarily designed for capturing kick drums and bass guitar cabinets, the Sennheiser E902 excels in reproducing low frequency instruments with incredible richness and detail. The E902 features a dynamic element with a cardioid polar pattern. The dynamic element provides high headroom and low distortion when capturing signals at excessive sound pressure levels. The E902 responds to very fast attacks with extreme accuracy, without distortion. Low frequency response is optimized allowing the E902 to excel in reproducing kick drum, bass amplifiers, acoustic bass, tuba, timpani and much more.
Transducer | Dynamic |
Polar Pattern | Cardioid |
Frequency Response | 40Hz to 16kHz |
Dynamic Range (Typical) | not specified by manufacturer |
Signal-to-Noise Ratio | not specified by manufacturer |
Maximum Input Sound Level | not specified by manufacturer |
Power Requirements | None, dynamic element |
Output Impedance | Nominal (@ 1kHz): 350 ohms Min. terminating: 1k ohms |
Output Connectors | 3-pin XLR male |
Pad | No |
Low Frequency Roll-Off | No |
Dimensions | 5.06 x 2.36" (128.5 x 60mm) (Length x Diameter) |
Weight | 15.52 oz (440 g) |