Manfrotto MT055XPRO3-3W Aluminum Tripod with 3-Way Pan/Tilt Head

Manfrotto MT055XPRO3-3W Aluminum Tripod with 3-Way Pan/Tilt Head

Tiltall Tripod TE Original Series Tripod with 3-Way Head (Gold)

Tiltall Tripod TE Original Series Tripod with 3-Way Head (Gold)

Oben AC-2361 Tripod with BE-117 Ball Head Kit

 
  • Load Capacity: 17 lb
  • Max Height: 69.7"
  • Min Height: 10.2"
  • Folded Length: 29.1"
  • Leg Sections: 3
  • Weight: 5.8 lb
  • BE-117 Arca-Type Compatible Ball Head
  • Rubber Feet with Retractable Spikes
  • Ball Head with Separate Panning Lock
  • Quick-Release Plate
Lease to Own at
$13 /week or less
Availability: In stock
SKU
AC-2361/BE-117

Oben AC-2361 Overview

The AC-2361 3-Section Aluminum Tripod Legs (Flip Lock) from Oben is a sturdy support for most DSLR, mirrorless, point-and-shoot cameras, or compact camcorders. With a load capacity of 17.6 lb and a maximum height of 66", the tripod offers a number of advanced features that ensure its stability and reliable performance.

The tripod's flip locks, which enable the extension and securing of the leg stages, are user-adjustable. By using a supplied Allen key, the user can tighten two points on each spring-loaded flip lock to safeguard their continued reliable performance.

With its anodized aluminum construction, the AC-2361 is durable. The tripod chassis is cast aluminum alloy for further strength.

The AC-2361's rapid center column extends with a twist of the butterfly knob. For protecting your camera when the column is retracted quickly, there's a rubber damper under the center-post collar. Steel locking screws underneath the collar enable you to fasten a camera head more securely.

Pull-in/push-out positive leg locks allow you to set the positions of the three legs independently at three different angles. This allows you to shoot from low angles or on uneven terrain. For stability on softer terrain, the AC-2361 features metal spikes that retract and emerge by twisting the foot's rubber portion.

For extreme low-angle shooting, the center column can be split into two sections with the provided Allen key. The shorter column leaves no protruding parts under the tripod collar, allowing you to extend the legs out to their maximum angle. For a faster method, the center column is also easily reversible. These features are especially ideal for macro and close-up photography. The retractable metal counterweight hook serves as a stopper at the bottom of the center column.

The BE-117 Ball Head from Oben is a lightweight aluminum ball head that features an Arca-type compatible quick-release system. It has a large locking knob to control the movement of the ball, and a separate knob for the 360° panning movement.

The BE-117's multiple knobs enable higher-precision adjustments to the head than are possible with single-lever heads. Taking panoramic photos is simple, for instance, because you can pan a specific number of degrees while keeping the head's tilt position locked. In fact, the BE-117 features degree markings around its circumference to aid in that task. A notch in the ball head allows you to quickly change between portrait and landscape orientation.

The included quick-release plate attaches to your camera via its standard 1/4"-20 screw, and is secured in place with an Arca-type clamp. A locking knob controls the opening and closing of the aluminum clamp simply and reliably. Two safety screws on the bottom of the plate help prevent your camera from accidentally being released when adjusting the plate fore and aft. One bubble level on the clamp, and another on the locking knob, both ensure that your camera will be level with the horizon.

Foam grips on two legs mitigate the effects of extreme heat & cold and provide comfortable grip

The included hex keys attach to a tripod leg, so you're always ready to tighten components

Reversible 1/4"-20 & 3/8"-16 screw fits almost any head

Bubble level on tripod chassis

Center column is grooved to prevent its rotation

Split center column for low angle set-up

Spring-loaded metal counterweight hook at the bottom of the center column

Integrated aluminum alloy loop for attaching an optional shoulder strap

Rugged rubber tips with retractable spikes for shooting both indoors and outdoors on many surfaces

Included padded carry bag features dual heavy-duty zippers, an interior pocket, and extra room to accommodate a head

More Information
Specification
Load Capacity17.6 lb / 8 kg
Maximum Working Height66" / 167.6 cm
Max Height without Center Column55.8" / 141.7 cm
Minimum Working Height6.5" / 16.5 cm
Folded Length25.4" / 64.5 cm
Head Mount Type1/4"-20 Screw, 3/8"-16 Screw
Weight5 lb / 2.3 kg
MaterialsAluminum Alloy
Bubble LevelYes
Head TypeBall Head
Base Mount3/8"-16 Thread
Quick Release Plate TypeArca-Type
Load Capacity17.6 lb / 7.98 kg
Number of Bubble Levels2
Friction ControlNo
Independent Pan LockYes
Write Your Own Review
You're reviewing:Oben AC-2361 Tripod with BE-117 Ball Head Kit

No Related Posts