Lastolite - 5' x 6' Collapsible Chromakey

Lastolite - 5' x 6' Collapsible Chromakey

Lume Cube - AIR LED Portable Lighting Kit

Lume Cube - AIR LED Portable Lighting Kit

TASCAM - 6-Track Audio Recorder for Select DSLR Cameras - Black

 

SD memory card slot; 6-track recording; built-in mixer; Ambisonics recording; AmbiX and FuMa support; 4 XLR inputs with +48V phantom power; gang function; selectable mic positioning

Lease to Own at
$29 /week or less
Availability: In stock
SKU
DR-701D

Record and mix high-quality sound for video production with this Tascam six-track recorder. The HDMI clock synchronization keeps audio files perfectly timed to your videos for quick editing, and the cascade feature lets you add more tracks with additional units. This Tascam six-track recorder has a magnesium-alloy chassis for lightweight durability.

  • Compatible with select DSLR cameras\nIncluding Panasonic DC-GH5S, AG-DVX200, AG-UX180, AG-UX90, DMC-GH4, DC-GH5, HC-X1000; Sony PXW-FS5, NEX-FS700, NEX-FS100, α9, α7S II, α7R II, α7S, α7 II, DSC-RX10M2; JVC GY-LS300;
  • Nikon D4S, D5, D500, D750, D810, D850; GoPro HERO4, HERO3+; Canon EOS 5D Mark III, EOS 5D Mark IV, EOS 7D Mark II, EOS C100. Some product features are dependent on camera firmware.
  • Six-track recording (four tracks + L/R stereo mix)\nUsing the built-in mixer, four tracks and their stereo mix (six tracks total) can be recorded simultaneously.
  • In addition to pan and level adjustments, the mixer includes a delay function to compensate for distances between mics. A mid-side decoding function is also built-in for use with MS stereo mics.
  • HDMI video clock synchronization\nThe HDMI input and output allow the DR-701D's internal clock and the camera to be digitally synchronized.
  • One-button recordings\nUnlike other systems that force you to press record on both devices, the HDMI start system prevents missed takes, synchronizes two recording starts together, and makes single-operator shoots much easier.
  • Cascade feature for additional track recording\nBy connecting multiple units using HDMI, slave DR-701D units can be made to follow the master unit to start and stop recording simultaneously.
  • SMPTE timecode stores time data in recorded audio files\nThe built-in SMPTE generator allows the camera and DR-701D to store the same location reference. Several options are available to integrate SMPTE LTC into your camera system.
  • The BNC timecode input can follow a source signal or can be jam-synced a few times per day for independent freewheel operation. Cameras that send timecode through their HDMI output can be followed by the DR-701D's timecode input.
  • And the internal generator can be started without an external reference for a simple time-of-day stamp on recorded BWAV files.
  • High-quality HDDA mic preamps\nResolutions up to 96kHz/24-bit are supported when recording six tracks and 192kHz/24-bit when recording two tracks.
  • Multiple mic inputs support various on-set recording options\nFour XLR/TRS inputs can be adjusted and recorded independently. Talent can be recorded using shotgun mics, lavaliers, or both simultaneously.
  • Ambience can be recorded using a stereo mic (or the built-in mics). The 3.5mm stereo input can be selected for channels 1-2, and the built-in omnidirectional mics for channels 3-4 for an even wider range of mic setups.
  • Multiband limiter and five-stage low-cut filter built in\nThe limiter function automatically adjusts excessive input levels and can operate independently on each of four inputs.
  • In addition, the low-cut filter can be adjusted to five different frequencies to cut wind noise, rumble and other undesirable low frequencies without damaging the source audio.
  • Dual-recording function\nDual recording captures a safety track at a level 6 to 12dB lower than the main track. In case of sudden volume changes on-set, the safety track makes sure that you have an undistorted take.
Write Your Own Review
You're reviewing:TASCAM - 6-Track Audio Recorder for Select DSLR Cameras - Black