Makita 18-Volt X2 LXT 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer, Accepts SDS-Plus Bits, AFT, AWS Capable, - Tool Only

Makita 18-Volt X2 LXT 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer, Accepts SDS-Plus Bits, AFT, AWS Capable, - Tool Only

Makita 18-Volt X2 LXT 36-Volt 1-1/8 in. Brushless Cordless AVT Rotary Hammer Kit w/ HEPA Dust Extractor 5.0 Ah

Makita 18-Volt X2 LXT 36-Volt 1-1/8 in. Brushless Cordless AVT Rotary Hammer Kit w/ HEPA Dust Extractor 5.0 Ah

Makita 18-Volt X2 LXT Lithium-Ion 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer, AFT, AWS Capable - Tool Only

 
  • Up to 140 1/2" x 2-3/8" holes using two LXT® 5.0Ah batteries
  • 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy
  • Tool has a 3-year limited warranty from date of purchase
Lease to Own at
$27 /week or less
Availability: In stock
SKU
XRH10Z
  • The Makita 18-Volt X2 LXT (36-Volt) Brushless 1-1/8 in. AVT Rotary Hammer (accepts SDS-PLUS bits) is a cordless concrete solution that's loaded with advanced engineering for maximum efficiency and convenient dust extraction. with X2 LXT technology, the Rotary Hammer delivers up to 140 in. x 2-3/8 in. holes per charge when using two 18-Volt LXT 5.0 Ah batteries (sold separately). When installed, the trigger-activated dust extractor is powered by a separate motor which increases suction efficiency without sacrificing the performance of the rotary hammer. The rubber suction gasket is engineered to provide consistent contact with the work surface, where the dust is channeled to the clear dust container with HEPA filter which captures 99.97% of dust particles (size 0.3 mic). An added feature is a 3-second delay on the vacuum motor: After the trigger is released, the 3-second extended suction collects remnant dust and particles as the bit is being pulled out of the work surface, making it ideal for overhead drilling. The rotary hammer can be used with a separate attachment and dust extractor (sold separately). The Rotary Hammer is AWS capable with Auto-Start Wireless System, which utilizes Bluetooth technology for wireless power-on/off communication between tool and equipped dust extractor. To activate AWS, simply install the Auto-Start Wireless Transmitter (198901-5, sold separately) and synchronize with an AWS-equipped dust extractor (XCV08, sold separately).

    • X2 LXT technology delivers up to 140-1/2 in. x 2-3/8 in. holes per charge using two 18-Volt LXT 5.0 Ah batteries (batteries not included)
    • Powerful BL brushless motor delivers 0 RPM to 980 RPM, 0 BPM to5,000 BPM and 2.3 ft./lbs. of impact energy to handle the most demanding applications
    • Dust extraction capability with optional OSHA table 1 compliant on-board dust extractor attachment
    • Auto-Start Wireless System (AWS) which utilizes Bluetooth technology for wireless power-on/off communication between tool and dust extractor
    • AWS capable with auto-start wireless transmitter (part number. 198901-5) sold separately
    • Active Feedback-Sensing Technology (AFT) electronically turns off the motor if rotation of bit is suddenly forced to stop
    • Anti-Vibration Technology (AVT) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
    • Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
    • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
    • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
    • Electric brake allows the tool to be repositioned faster for maximum productivity
    • Variable speed dial and trigger enables user to match the speed to the application
    • Built-in LED light with an independent on/off illuminates the work area
    • Ergonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job
    • 3-mode operation for rotation only, hammering with rotation or hammering only for multiple applications
    • Retractable tool hook secures the tool when not in use
    • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
More Information
Specification

Dimensions

Product Depth (in.)
5.47 in
Product Height (in.)
10.630 in
Product Width (in.)
17.600 in

Details

Amperage (amps)
0.0 A
Batteries Included
No
Battery Amp Hours
0
Battery Power Type
Lithium Ion
Battery Size
New
Battery/Charger
Tool Only
Battery/Charger
Tool Only
Charger Included
Charger Not Included
Chuck Capacity
0.0 in
Chuck Type
SDS-Plus
Color Family
Teal
Condition
New
Cordless Tool Type
Rotary Tool
Cordless/ Corded
Cordless
Kit
No
Maximum Speed (rpm)
980
Motor Type
Brushless
Number of Batteries Included
0

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
3-year limited warranty
Write Your Own Review
You're reviewing:Makita 18-Volt X2 LXT Lithium-Ion 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer, AFT, AWS Capable - Tool Only

No Related Posts