Milwaukee M18 18-Volt Lithium-Ion Cordless Rotary Cut Out Tool Kit w/ Two 3.0 Ah Batteries, Charger and Tool Bag

Milwaukee M18 18-Volt Lithium-Ion Cordless Rotary Cut Out Tool Kit w/ Two 3.0 Ah Batteries, Charger and Tool Bag

Makita 18-Volt X2 LXT 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer Kit w/ HEPA Dust Extractor AFT AWS Capable 5.0 Ah

Makita 18-Volt X2 LXT 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer Kit w/ HEPA Dust Extractor AFT AWS Capable 5.0 Ah

Makita - 18-Volt X2 LXT Lithium-Ion 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer Kit 5.0 Ah

(4.7)  
  • Up to 140 1/2" x 2-3/8" holes using two 5.0Ah batteries
  • 0-980 RPM, 0-5,000 BPM and 2.3 ft.lbs. of impact energy
  • Tool, Battery and Charger have a 3-year limited warranty
Lease to Own at
$35 /week or less
Availability: In stock
SKU
XRH08PT
  • The Makita 18-Volt X2 LXT (36-Volt) Brushless 1-1/8 AVT Rotary Hammer is a cordless concrete solution that's loaded with advanced engineering for maximum efficiency. Its powered by two 18-Volt LXT batteries and an efficient brushless motor for maximum power, speed and run-time for corded demands, without the cord. X2 LXT technology delivers up to 140 in. x 2-3/8 in. holes per charge when using two 18-Volt LXT 5.0 Ah batteries. for reduced vibration, its equipped with Anti-Vibration Technology (AVT). More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle further reduce vibration. The result is a low vibration rating of only 9m/s, but with no compromise in performance: The efficient brushless motor delivers a full 2.3 ft./lbs. of impact energy, with 250 RPM to 980 RPM and 0 BPM to 5,000 BPM. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs. Additional performance features include a electric brake, variable speed dial, built-in LED light, and a retractable tool hook.

    • X2 LXT technology delivers up to 140-1/2 in. x 2-3/8 in. holes per charge using two 18-Volt LXT 5.0 Ah batteries
    • Powerful BL brushless motor delivers 0 RPM to 980 RPM, 0 BPM to 5,000 BPM and 2.3 ft./lbs. of impact energy to handle the most demanding applications
    • Dust extraction capability with optional OSHA table 1 compliant on-board dust extractor attachment
    • Anti-Vibration Technology (AVT) is an active internal counterbalance system which is engineered to reduce vibration for increased comfort
    • Vibration-absorbing back handle and side handle further reduce vibration and increase comfort on the job
    • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
    • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
    • Electric brake allows the tool to be repositioned faster for maximum productivity
    • Variable speed dial and trigger enables user to match the speed to the application
    • Built-in LED light with an independent on/off illuminates the work area
    • Ergonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job
    • 3-mode operation for rotation only, hammering with rotation or hammering only for multiple applications
    • Retractable tool hook secures the tool when not in use
    • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
    • 18-Volt LXT lithium-ion 5.0 Ah battery BL1850B, features an integrated LED battery charge level indicator
    • 18-Volt LXT lithium-ion 5.0 Ah battery BL1850B provides up to 65% more run time per charge compared to BL1830
    • 18-Volt LXT lithium-ion 5.0 Ah battery BL1850B reaches a full charge in 45-minutes or less
More Information
Specification

Dimensions

Product Depth (in.)
12.5 in
Product Height (in.)
0.000 in
Product Width (in.)
0.000 in

Details

Amperage (amps)
5.0 A
Batteries Included
Yes
Battery Amp Hours
5
Battery Power Type
Lithium Ion
Battery Size
New
Battery/Charger
(2) 5.0 Ah Batteries & Charger Included
Battery/Charger
2 Batteries & Charger Included
Charger Included
Charger Included
Chuck Capacity
0.0 in
Chuck Type
SDS-Plus
Color Family
Teal
Condition
New
Cordless Tool Type
Rotary Tool
Cordless/ Corded
Cordless
Kit
Yes
Maximum Speed (rpm)
980
Motor Type
Brushless
Number of Batteries Included
2

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
3-year limited warranty on tool, battery and charger
Write Your Own Review
You're reviewing:Makita - 18-Volt X2 LXT Lithium-Ion 36-Volt 1-1/8 in. Brushless Cordless Rotary Hammer Kit 5.0 Ah

No Related Posts