Audio-Technica - Audio Technica AT-XP5/H Headshell Combo Kit - (Red)

The AT-XP5/H combo kit includes the AT-XP5 DJ cartridge premounted on the AT-HS6BK headshell.Features- 0.3 x 0.7 mil elliptical bonded stylus tip- Highly rigid, lightweight polyphenylene sulfide (PPS)/glass fiber body- 5.5 mV high-level output- Tracking force of 2.0 to 4.0 grams (3.0 grams standard)- Durable carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking- Design offers maximum visibility of the stylus tip- Great tracking and channel separation for high-fidelity sound- Universal ½""-mount headshell for 4-pin turntable cartridgesSpecifications- Frequency Response: 20-18,000 Hz - Channel Separation: 20 (dB at 1 kHz) - Vertical Tracking Force: 2.0-4.0 g (3.0 g standard) - Stylus Construction: Bonded round shank - Recommended Load Impedance: 47,000 ohms - Output: 5.5 mV (1 kHz, 5 cm/sec.) - Channel Balance: 2.0 dB (1 kHz) - Stylus Shape: 0.3 x 0.7 mil elliptical - Cantilever: Carbon fiber-reinforced ABS - Mount: Half-inch - Replacement Stylus: ATN-XP5 - Coil Impedance: 6.7 k ohms (1 kHz) - DC Resistance: 990 ohms - Recommended Load Capacitance: 100 to 200 pF - Vertical Tracking Angle: 20° - Dimensions: 17.2 mm (0.68") H × 17.8 mm (0.67") W × 28.3 mm (1.20") D - Weight (Cartridge): 6.2 g (0.22 oz) - Dimensions (Cartridge and Headshell): 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D - Weight (Cartridge and Headshell): 15.6 g (0.55 oz) - Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, two nuts, non-magnetic screwdriver

Frequency Response

20-18,000 Hz

Stylus Construction

Bonded round shank

Stylus Shape

0.3 x 0.7 mil elliptical

Cantilever

Carbon fiber-reinforced ABS

Recommended Load Impedance

47,000 ohms

Mount

Half-inch

Accessories Included

Two 11 mm installation screws, two 8 mm installation screws, two washers, two nuts, non-magnetic screwdriver