PreSonus Temblor T10 Active 10" Studio Subwoofer
- 10" Composite Low Frequency Driver
- 110 dB Continuous Maximum SPL
- 250 Watts of Class AB Amplification
- Variable 50 to 130 Hz Low Pass Filter
The Temblor T10 Active 10" Studio Subwoofer is designed for low frequency sound reinforcement while monitoring in a recording studio. The subwoofer utilizes a 10-inch composite low frequency driver with a frequency response of 20 to 200 Hz and a maximum SPL of 110 dB. The driver is housed within a heavily braced and reinforced MDF cabinet with a vinyl finish and ported bass reflex design. It is powered by a 250 Watt Class AB plate amplifier. To reduce vibration, the unit features internal dampening and rests on built-in feet. The subwoofer features a variable crossover frequency between 50 and 130 Hz, input gain controls from -30 dB to +6 dB, a 0° or 180° phase switch, and a ground lift switch.
You can connect to the subwoofer via a pair of balanced XLR inputs, a balanced pair of 1/4" TRS inputs, or an unbalanced pair of RCA inputs. The subwoofer also includes a balanced pair of XLR pass-through outputs, a balanced pair of 1/4" TRS pass-through outputs, and a balanced XLR sub output. The unit features a 120/240 VAC switchable power supply to accompany studio monitors in different regions. A footswitch with a cable is included.
User Manual
2.6 MB
- UPC: 673454002687
| Specification | ||
|---|---|---|
| Transducer | 10" Composite | |
| Power | 250 W | |
| Amplifier Type | Class AB | |
| Maximum SPL | 110 dB continuous | |
| Controls | Input gain: continuously variable from -30 to +6 dB\nLow pass filter: continuously variable from 50 to 130 Hz\nPhase switch: 0° and 180°\nGround lift switch | |
| Inputs | Left and right balanced XLR\nLeft and right balanced 1/4" TRS\nLeft and right unbalanced RCA | |
| Outputs | Left and right balanced XLR pass-through\nLeft and right balanced 1/4" TRS pass-through\nBalanced XLR Sub out\n1/4" Sub bypass | |
| Design | Front firing bass-reflex acoustic port\nInternal dampening and heat sink | |
| Construction | Resonance-suppressing internal bracing\nInternal dampening and heat sink | |
| Frequency Response | 20 to 200 Hz | |
| Crossover Frequency | Variable 50 to 130 Hz | |
| Voltage | 100 to 120 VAC at 50/60 Hz\n220 to 240 VAC at 50-60 Hz | |
| Dimensions (H x W x D) | 16.14 x 13.19 x 16" (410 x 335 x 406 mm) | |
| Weight | 31.7 lb (14.4 kg) |