Audio-Technica - Audio Technica AT-VM95SH Dual Moving Magnet Cartridge - (Brown)

This VM95 Series cartridge with 2.7 x 0.26 mil Shibata stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli. Features- VM95 Series dual magnet cartridge with 2.7 x 0.26 mil Shibata stylus- Aluminum cantilever- Durable low-resonance polymer housing- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required- Compatible with any AT-VMN95 replacement stylusSpecifications- Frequency Response: 20-25,000 Hz- Channel Separation: 23 (dB at 1 kHz)- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)- Stylus Construction: Nude square shank- Recommended Load Impedance: 47,000 ohms- Output: 3.5 mV (1 kHz, 5 cm/sec.)- Channel Balance: 1.5 dB (1 kHz)- Stylus Shape: 2.7 x 0.26 mil Shibata- Cantilever: Aluminum pipe- Mount: Half-inch- Replacement Stylus: AT-VMN95SH- Coil Impedance: 3.3 k ohms (1 kHz)- DC Resistance: 485 ohms- Load Capacitance: 100 to 200 pF- Coil Inductance: 550 mH (1 kHz)- Vertical Tracking Angle: 23°- Dimensions: 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D- Weight: 6.1 g (0.22 oz)- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver

Frequency Response

20-25,000 Hz

Stylus Construction

Nude square shank

Recommended Load Impedance

47,000 ohms

Stylus Shape

2.7 x 0.26 mil Shibata

Cantilever

Aluminum pipe

Mount

Half-inch

Accessories Included

Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver