Audio-Technica - Audio Technica AT-VM95EN/H Headshell/Cartridge Kit - (Orange)

The AT-VM95EN/H combo kit includes the AT-VM95EN dual moving magnet cartridge premounted on the AT-HS6BK headshell.Features:-VM dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus-Aluminum cantilever-Specially wound coils increase output voltage-Durable low-resonance polymer housing-Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers required-Compatible with any AT-VMN95 replacement stylus-Universal ½""-mount headshell for 4-pin turntable cartridgesSpecifications- Frequency Response: 20-23,000 Hz- Channel Separation: 22 (dB at 1 kHz)- Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)- Stylus Construction: Nude round shank- Recommended Load Impedance: 47,000 ohms- Output: 3.5 mV (1 kHz, 5 cm/sec.)- Channel Balance: 2.0 dB (1 kHz)- Stylus Shape: 0.3 x 0.7 mil elliptical- Cantilever: Aluminum pipe- Mount: Half-inch- Replacement Stylus: AT-VMN95EN- Coil Impedance: 3.3 k ohms (1 kHz)- DC Resistance: 485 ohms- Load Capacitance: 100 to 200 pF- Coil Inductance: 550 mH (1 kHz)- Vertical Tracking Angle: 23°- Dimensions (Cartridge): 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D- Weight (Cartridge): 6.1 g (0.22 oz)- Dimensions (Cartridge & Headshell): 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") D- Weight (Cartridge & Headshell): 15.5 g (0.55 oz)- Accessories Included: Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver

Frequency Response

20-23,000 Hz

Stylus Construction

Nude round shank

Recommended Load Impedance

47,000 ohms

Stylus Shape

0.3 x 0.7 mil elliptical

Cantilever

Aluminum pipe

Mount

Half-inch

Accessories Included

Two 11 mm installation screws, two 8 mm installation screws, two washers, nonmagnetic screwdriver