Everbilt 0.25 HP Pre-Plumbed Sink Tray System Sump Pump

Everbilt 0.25 HP Pre-Plumbed Sink Tray System Sump Pump

Taco Comfort Solutions TacoGenie 1/40 HP Hot Water Recirculating Pump with Undersink Kit

Taco Comfort Solutions TacoGenie 1/40 HP Hot Water Recirculating Pump with Undersink Kit

Saniflo SaniVite 0.4 HP 115-Volt Heavy Duty Drain Pump

The SaniVite is a drain pump that is ideally suitable for use in a basement apartment or anywhere in the house where additional fixtures are most wanted. It will pump waste water away from a variety of sources such as: a kitchen sink, laundry sink, washing machine (indirect connection), dishwasher, bar sink, etc. The SaniVite model was designed to sustain the toughest applications meant for gray water pumps. Its pumping capabilities and unique design are the reason why these range of pumps are preferred for heavy duty applications. The inside of the SaniVite is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the pump. When the water enters the SaniVite, it activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum. Water enters the chamber and is pumped away into the sanitary sewer. The unit pumps the effluent upward to 16 ft. and/or 150 ft. horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the micro switch deactivates the unit until water enters the unit again. A normal operating cycle for the SaniVite can be as short as 2 to 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.

Lease to Own at
est. $30 /week*
Availability: In stock
SKU
8

Product Overview

The SaniVite is a drain pump that is ideally suitable for use in a basement apartment or anywhere in the house where additional fixtures are most wanted. It will pump waste water away from a variety of sources such as: a kitchen sink, laundry sink, washing machine (indirect connection), dishwasher, bar sink, etc. The SaniVite model was designed to sustain the toughest applications meant for gray water pumps. Its pumping capabilities and unique design are the reason why these range of pumps are preferred for heavy duty applications. The inside of the SaniVite is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the pump. When the water enters the SaniVite, it activates a micro switch in the pressure chamber, which in turn starts the motor. The motor is sealed for life in an oil filled enclosure. A spindle/shaft drives the impeller and therefore the moving parts are kept to an absolute minimum. Water enters the chamber and is pumped away into the sanitary sewer. The unit pumps the effluent upward to 16 ft. and/or 150 ft. horizontally (with gravity fall). Once the water is discharged and the water level in the container goes down, the micro switch deactivates the unit until water enters the unit again. A normal operating cycle for the SaniVite can be as short as 2 to 10 seconds depending upon the discharge pipe run configuration; power consumption is therefore minimal.

  • Discharges 18 GPM at 16 ft. of head
  • Ideal for heavy duty residential applications multiple inlets for various installations
  • Small enough to fit inside a kitchen cabinet
  • Can handle hot water and moderate amounts of grease build up
Write Your Own Review
You're reviewing:Saniflo SaniVite 0.4 HP 115-Volt Heavy Duty Drain Pump

No Related Posts