Drill America 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in. and 1 in. Carbon Steel NPT Pipe Tap and Die Set (12-Piece) DWTNPT-SET
Sizes(in.):1/8, 1/4, 3/8, 1/2, 3/4 and 1 NPT pipe taps and dies
Used to clean and or re-thread damaged or jam pipe threads
Threads a wide variety of materials both ferrous and non-ferrous
About This Product
12-Piece Carbon Steel NPT Pipe Tap and Die Set in Case 1/8 in., 1/4 in., 3/8 in., 1/2 in., 3/4 in. and 1 in. in Wooden Case About the Taps: Also called Pipe Taps, National Pipe Taper Taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. Carbon steel pipe taps are designed to clean and or re-thread damaged or jammers pipe threads. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer. NPT threads require the use of a sealer like Teflon tape or pipe compound. About the Dies: Drill America Hex Dies are for rethreading over bruised or rusty threads. They are the most cost effective type of rethreading tool available. No special holder is required for this type of die.
Highlights
Carbon steel NPT pipe taps are designed to clean and or re-thread damaged or jam pipe threads
NPT pipe taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous
Nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap
NPT pipe hex dies are for re-threading or cleaning bruised or rusty threads
NPT pipe hex dies ideal for maintenance
Return Policy
California residents
see Prop 65 WARNINGS
Product Information
| Manufacturer | Other Brands |
|---|