AKG C414 XLII Multi-Pattern Large-Diaphragm Condenser Microphone
The classic C414 XLII Multi-Pattern Large-Diaphragm Condenser Microphone from AKG is a staple within the audio industry. Equipped with nine selectable polar patterns, three attenuation levels and three switchable bass-cut filters, the C414 XLII remains one of the most versatile condenser microphone for recording vocals, drums, and acoustic & amplified instruments in the studio or on stage.
The classic C414 XLII Multi-Pattern Large-Diaphragm Condenser Microphone from AKG is a staple within the audio industry. Equipped with nine selectable polar patterns, three attenuation levels and three switchable bass-cut filters, the C414 XLII remains one of the most versatile condenser microphone for recording vocals, drums, and acoustic & amplified instruments in the studio or on stage.
This microphone closely approximates the sound of the legendary AKG C12. A slight high-frequency rise at 3 kHz and above helps compensate for the natural loss of high frequencies that occurs at a distance, making the C414 XLII an excellent choice for miking vocals & instruments that are positioned far way. The 1" edge-terminated dual-diaphragm transducer combined with the low-noise electronic circuitry provide a wide dynamic range of 134 dB and can handle SPL up to 158 dB, for a neutral and detailed sound.
Features include a peak-hold LED to alert you if overload peaks occur, and a Lock Mode so the microphone settings cannot be changed unintentionally. The elastic capsule suspension minimizes structurally-transmitted noise from chassis vibration. The rugged all-metal body ensures efficient rejection of RF interference and makes this microphone well suited to withstand the rigors of studio and stage handling.
Built and designed in Austria, the C414 XLII comes with a metal carrying case, a spider-type shockmount, a pop filter, and a foam windscreen.
- Dual 1” edge-terminated transducer
- Nine polar patterns: omnidirectional, cardioid, hypercardioid, figure-8
- 134 dB dynamic range (up to 158 dB SPL)
- High-frequency boost at 3 kHZ for distance miking
- Lock Mode for live operation – all controls can be conveniently disabled
- Peak-hold LED displays overload peaks
- All-metal body rejects electrostatic and electromagnetic interference
- Three switchable bass-cut filters to reduce wind noise and proximity effect (40, 80, & 160 Hz)
- Three attenuation levels for close-up recording and high-output sources (-6,-12,-18 dB)
- Elastic capsule suspension minimizes structurally-transmitted noise from chassis vibration
- Designed and manufactured in Austria
Specifications
Polar Pattern Cardioid, Figure-8, Hypercardioid, Omnidirectional, Wide-Angle Cardioid Frequency Range 20 Hz to 20 kHz Signal to Noise Ratio 88 dB A-Weighted Equivalent Noise Level 6 dB A-Weighted Maximum SPL 158 dB SPL with 18 dB Pad Engaged Impedance 200 ohms Load Impedance 2200 ohms Sensitivity 23 mV/PA Power Requirements 48 V Low-Cut Filter Yes @ 160 Hz
Yes @ 80 Hz
Yes @ 40 HzPad Yes, 6 dB
Yes, 12 dB
Yes, 18 dBOutput Connectors 3-pin XLR Operating Temperature 14 to 140°F (-10.00 to 60.00°C) Operating Current Consumption 4.5 mA Dynamic Range More Information More Information Manufacturer Other Brands Write Your Own Review