DEWALT 20-Volt MAX Combo Kit (8 tool) w/ 2-Batteries 2 Ahr, Charger and 2-Bags
- Impact Driver, Oscillating Tool, Sander, Grinder and Vacuum
- (2) 2.0 Ah Batteries, Charger and 2 Kit Bags
Product Overview
This Cordless 8-Tool Combo Kit includes a 1/2 in. Drill/Driver, Reciprocating Saw, 6-1/2 in. Circular Saw, Brushless Oscillating Multi-Tool, 1/4 in. Impact Driver, 5 in. Random Orbit Sander, 4-1/2 in. Grinder, Wet/Dry Vacuum, two 20-Volt MAX 2.0Ah battery, charger, and 2 kit bags. The DCS393 Circular Saw with 6-1/2 in. carbide blade can cut 2x4s at a 45° angle in a single pass. The DCS381 Reciprocating Saw with keyless blade clamp allows for quick blade changes. The DCD771 Drill/Driver has a high-speed transmission with two speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications. The DCF885 Impact Driver is equipped with 3 LEDs that have a 20-second delay after the trigger is released for increased visibility. The DCW210 Random Orbit Sander has a variable-speed dial with speed control from 8,000 to 12,000 OPM for a variety of applications. The DCG412 Grinder is equipped with an 8,000-rpm motor for multiple grinding and cutting applications. DCS356 Oscillating Multi-Tool 3-speed selector allows users to choose their speed setting based on application. The DCV517 Wet/Dry Vacuum comes with a HEPA wet/dry filter that traps up to 99.97% of dust at 0.3 microns.
- DCD771 cordless drill/driver has a high-speed transmission delivers 2 speeds (0 rpm to 450 rpm and 1,500 rpm) for a range of fastening and drilling applications
- DCD771 cordless drill/driver has a high-performance motor that delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
- DCS885 cordless impact driver has a compact design (5.55 in. front to back) so it fits into tight areas
- DCS381 cordless reciprocating saw with keyless blade clamp allows for quick blade change without touching the blade or reciprocating shaft
- DCS393 cordless circular saw with 6-1/2 in. carbide blade can cut 2x4's at a 45° angle in a single pass
- DCW210 cordless random orbit sander has variable-speed control from 8,000 – 12,000 OPM to match the speed to the application
- DCS356 cordless oscillating multi-tool 3-speed selector allows users to choose their speed setting based on the application
- DCG412 grinder provides high power for cutting and grinding applications up to 8,000 rpm
- DCV517 wet/dry vacuum comes with a HEPA wet/dry filter that traps up to 99.97% of dust at 0.3 microns