Horizontal Slot Mortiser

The Grizzly G0846 Horizontal Slot Mortiser incorporates a router mounted on its side with the workpiece clamped to a multi-axis sliding table. Use it to quickly cut mortises for traditional mortise-and-tenon or 'loose tenon' joinery and easily cut angled mortises as no elaborate jigs and fixtures are required. The G0846 is driven by a powerful 2-horsepower, 220-Volt, 10 Amp motor and is equipped with a 20 in. x 8 in. precision-ground cast-iron table. The table features an adjustable cam-action hold-down clamp to secure the workpiece. The table glides along two hardened V-ways using 4 ball bearings for smooth, effortless motion. The table has two adjustable X-axis (side-to-side) stops and 1 Y-axis (depth) stop. The G0846 has an indexing guide with four spacing patterns that, when combined with the stops, are all crucial for repeat operations and production work.

Motor 2 HP, 220-Volt, single-phase, 10 Amp

Maximum stock thickness 10-3/4 in.

Table cross travel 6 in.

Table longitudinal travel 12-1/2 in.

Table vertical travel 5-1/2 in.

Table size 8-1/4 in. x 20 in.

Indexing guide increments 5/8 in., 3/4 in., 7/8 in. and 1 in.

Chuck capacity 5/8 in.

Dust port size 4 in.

Overall dimensions 32 in. W x 36 in. L x 48-1/2 in. H

Approximate shipping weight 315 lbs.