JBL 308P MkII - Studio Monitor Kit w/ Powered Subwoofer, Monitor Controller, and Cables

This B&H Kit combines a pair of JBL 308P MkII - Powered 8" Two-Way Studio Monitors with a JBL LSR310S 200W Powered Subwoofer, a desktop studio monitor control center, a pair of XLR cables, and a pair of 1/4" cables to create the primary components of a professional mixing and mastering monitor set up, for full range music production and broadcast facilities.

The JBL 308P MkII - Powered 8" Two-Way Studio Monitor is a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 308P MkII features dual 56W Class-D amplifiers, which power the 8" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 45 Hz to 20 kHz with a peak SPL of 112 dB.

The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 308P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 308P MkII ships with a power cord.

The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113 dB.

A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.

The Monitor Station V2 from PreSonus is a desktop studio control center that allows you to switch between three sets of studio monitors and three input sources. It also features a built-in headphone amplifier with four 1/4" headphone outputs, each with dedicated level control. These features make the Monitor Station V2 suitable for a variety of recording, monitoring and mixing applications.

For communicating with the talent, the Monitor Station V2 is equipped with a built-in electret-condenser talkback microphone with input-gain control and talkback button. It has a large main level control knob, dedicated buttons for input and speaker selection, and 8-segment color LED input meters for visual monitoring.

This 10' Roland Gold Series Neutrik XLR-M to XLR-F Balanced Microphone Cable is engineered to accurately transmit audio signals without contamination or noise interference. It features Neutrik connectors with 24k gold-plated contacts ensuring clean, precise audio reproduction. Studio-quality oxygen-free copper core wire translates every tonal nuance with exceptional clarity, and the low-capacitance design ensures that voices and instruments are clear and accurate.

The 10 foot PM-TRS 1/4" TRS Male to 1/4" TRS Male Interconnect Cable from Pearstone features Rean connectors with nickel-plated contacts on both ends, 24-gauge oxygen-free copper conductors, and spiral shielding to protect against EMI and RFI noise. Additionally, twin conductive PVC shields reduce electrostatic noise and provide a clean signal path while retaining good flexibility for those occasions that demand it.

The connector's molded strain relief over metal shells provides excellent durability and allows for increased protection between the OFC conductors and the connectors. The cable is ideal for both live and studio applications, including connecting powered speakers to studio monitor controllers, or connecting synthesizers and outboard gear to mixers, or wherever balanced connections are indicated.

User Manual

2.5 MB

Type: Electret condenser

Sensitivity: -42 dB

Input Impedance: 10 kΩ (balanced)

S/N Ratio: (1 kHz @ +10 dBu, unity gain) >105 dB

THD+N: (unwtd, 1 kHz @ 0 dBu output, unity gain) <0.0075%

Frequency Response: (±0.5 dB) 10 Hz to 65 kHz

Noise Floor: (20 Hz to 20 kHz, 150Ω input termination) -96 dBu

Maximum Input Level: (minimum gain, 1 kHz @ 0.5% THD+N) +22 dBu

Input Impedance: 47.5 kΩ

S/N Ratio: (1 kHz @ 0 dBu, Unity Gain) >115 dB

THD+N: (unwtd, 1 kHz @ 0 dBu Output, Unity Gain) <0.01%

Frequency Response: (±0.5 dB) 10 Hz to 50 kHz

Gain Range: 80 dB to +10 dB

Dynamic Range: 113 dB

THD+N: 0.0025% (1 kHz @ -1 dBFS)

Maximum Output: at 0 dBFS +18 dBu

Sample Rates: 44.1, 48, 88.2, 96 kHz

Sensitivity Range: -24 dB to 0 dB

Output Impedance: 51Ω (balanced)

THD+N: (unwtd, 1 kHz @ 0 dBu, unity gain) <0.01%

Frequency Response: (±0.5 dB) 10 Hz to 50 kHz

Main Level Range: -80 dB to 0 dB

Dim Attenuation Range: -30 dB to -6dB

Dim Attenuation: (talkback activated) -20 dB

Maximum Output: (60Ω load) 150 mW / channel

Frequency Response: (±1.0 dB) 10 Hz to 50 kHz

Input Connector Type: Barrel, 5.5 mm outside diameter, 2.1 mm inside diameter

Monitor Station Input Voltage Range: 18 VDC

Power Requirements: (continuous) 10W

JBL 308P MkII - Powered 8" Two-Way Studio Monitor

UPC: 691991007729

JBL LSR310S 200W Powered Subwoofer

UPC: 050036904636

PreSonus Monitor Station V2 Desktop Studio Control Center

UPC: 673454002823

Roland Gold Series Neutrik XLR-M to XLR-F Balanced Microphone Cable (10')

UPC: 761294211359

Pearstone PM-TRS 1/4" TRS Male to 1/4" TRS Male Interconnect Cable (10')

UPC: 847628580435

• The JBL 308P MkII - Powered 8" Two-Way Studio Monitor is a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 308P MkII features dual 56W Class-D amplifiers, which power the 8" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 45 Hz to 20 kHz with a peak SPL of 112 dB.
The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 308P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 308P MkII ships with a power cord.
• Patented Image Control Waveguide for detailed imaging and a broad, room-friendly sweet spot
High-quality JBL transducers for optimized transient response and improved linearity
Patented Slip Stream low-frequency port for superior bass performance at all playback levels
Dual integrated, custom Class-D amplifiers provide 112W of power for high output and dynamic range
Boundary EQ settings compensate for low-frequency variants introduced by the environment
HF Trim switch adjusts high-frequency output to room acoustics or personal preferences
Flexible connectivity with balanced XLR and 1/4" TRS inputs, +4 dBu / -10 dBV input-sensitivity switch and adjustable volume control
Engineered to JBL Linear Spatial Reference design criteria for outstanding accuracy in any working space
Strenuous JBL 100-hour full-power test ensures years of reliability
Sleek, modern design provides a visual upgrade to any studio
• UPC: 691991007729