JBL - Control HST 5-1/4" 100 W 8 Ohm and 70V/100V Wide-Coverage Speaker with LF and Dual Tweeters and HST Technology™-Each - White

The JBL Control HST speaker uses Hemispherical Soundfield Technology™ to provide wide, consistent audio coverage and minimize wall reflection issues that distort sound. Its design includes a wall-facing woofer and splayed tweeters, enabling full-range sound from a single speaker across large areas, reducing the number needed and cutting system costs. Available in white and black.

HST Hemispherical Soundfield Technology™

Provides extremely wide horizontal coverage that approaches 180°, covering a greater area with fewer speakers. Reduces the primary wall reflection, resulting in a flat frequency response and consistent sound character at all listening positions.

Components

5-1/4" CMMD woofer and two splayed ¾" fluid-cooled tweeters

Power handling

100 Watt power handling in direct 8Ω setting, plus built-in 60 Watt 70V/100V multi-tap transformer

IP54 Environmental rating

Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray.

System Power

100 W (400 W peak), 2 hrs. 75 W (300 W peak), 100 hrs

Transformer Taps

70V: 60W, 30W, 15W, 7.5W 100V: 60W, 30W, 15W

Terminals

Removable locking euro-block 4-pin connector with screw-down terminals for bare wire. Two pins for input and two pins for parallel loop-thru. Max. wire 12 AWG (2.5 mm2 ).

U-Bracket

A heavy-duty weather-capable zinc-rich, thick powder coated U-bracket is included. The speaker must be installed on its U-bracket for proper spacing to the wall. Do not mount the speaker directly in the corner of a room or onto a pole. It requires a wall surface in order to work properly.