Jet 15 in. Variable-Speed Floor Drill Press with 1/2 in. Chuck, 1 HP, 220/440V 3Ph (‚ÄéJ-A5818)
These Jet Drill Presses use a variable-speed motor with the stepped-pulley system and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
Jet 15 in. Variable-Speed Floor Drill Press with 1/2 in. Chuck, 1 HP, 220/440V 3Ph (‚ÄéJ-A5818)
About This Product
These Jet Drill Presses use a variable-speed motor with the stepped-pulley system and come equipped with a continuously variable transmission. This enables use at a wide range of speeds, as well as the ability to change speed during operation. A scale-marked hand wheel that matches the desired machine speed is mounted to a reduction gearing system for precise operator control. This adjusts the gearing ratio between the motor's fixed pulley and the output shaft's variable pulley, changing the speed of the chuck. A tensioner pulley is implemented in the belt transmission to take up or release the slack in the belt as the speed changes.
Highlights
- 1/2 in. drill chuck and arbor included
- 3 in. column diameter for maximum head support
- 6 in. stroke for deep hole application
- Full bearing support on quill for maximum spindle stiffness
- Handwheel speed adjustment of 400 to 5,000 RPM
- Large 2-1/4 in. quill for greater accuracy
| Manufacturer | Jet |
|---|---|
| Set Product as New from Date | Feb 9, 2026 |
| Set Product as New to Date | Apr 9, 2026 |
| Hard Drive | 8 GB |