Makita 10 in. Dual Slide Compound Miter Saw w/ 10 in. x 80T Micro-Polished Miter Saw Blade
Built with a 13 Amp direct-drive motor for smoother operation
Soft start provides for a smoother start-up
Features an electric brake that quickly stops the blade
Get a smoother start-up and constant power with not belts to slip or replace with this Makita 10 in. Slide Compound Miter Saw. There is an electric brake for added convenience and you get a smooth, dead-on cut due to the linear ball bearing system. The saw miters 0° to 47° left and 0 to 60° right, with positive stops at 0°, 15°, 22.5°, 31.6° and 45° (left and right). The rear-handle bevel lock is easily accessible with adjustments 0° to 45° (left and right) and positive stops at 0° and 45° (left and right). Use this saw for jobs that involve fine woodworking, carpentry or general construction. This bundle also comes with A-93681 10 in. x 80T Micro-Polished Miter Saw Blade
- Powerful 13 Amp direct drive motor requires less maintenance and delivers 4,300 RPM
- Miters 0 - 47° left and 0 - 60° right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° (left and right)
- Cuts up to 12 in. at 90° and 8-1/2 in. at 45°
- Linear ball bearing system engineered to deliver dead-on accurate cuts
- Rear handle bevel lock is easily accessible and adjusts 0 - 45° (left and right) with positive stops at 0°, 22.5°, 33.9°, 45° (left and right)
- Less weight (43.7 lbs.) and compact design for job site portability
- Soft start features for smooth start-ups
- Ergonomic rubberized D-handle design for better fit and added comfort
- Large precision machined aluminum base supports material for more efficient cutting
- Electric brake for maximum productivity
- See-through blade guard system for greater visibility of blade and line of cut
- Oversized trigger switch for better fit, added comfort and easier operation
- Includes extension wings for supporting long work pieces
- Ideal for baseboard and crown molding installation, finish carpenters, cabinet and furniture makers, wood floor installers, deck builders, general construction and more
- A-93681 - ATAF (Alternate Top and Alternate Face) tooth design for ultra precision cutting
- A-93681 - Japanese ultra-thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss
- A-93681 - Fully hardened and expertly hand-tensioned steel saw plates for true cuts
- A-93681 - Micro-grain carbide teeth are honed with up to 600 grit for a mirror finish
- Shop all Makita products
- Click here for more information on Electronic Recycling Programs
- California residents
- see Prop 65 WARNINGS
| Manufacturer | Makita |
|---|---|
| Set Product as New from Date | Mar 3, 2021 |
| Set Product as New to Date | May 2, 2021 |