Milescraft Lock Mate PLUS Self Clamping Professional Door Lock Installation Kit Bi-Metal Cobalt Hole Saws Wood or Metal Doors 13380003

About This Product

Maximize the speed and ease of door lock and knob installation projects with the LockMatePLUS. Perfect for large jobs where time is money, the self-clamping design sets up in seconds without the need for screws or hardware. The non-marring clamp has a wide rubber surface that sets up or removes instantly, prevents slipping and protects doors. To mount the LockmatePLUS simply place on door at desired location and twist the clamp. No mounting screws or hardware are required. High quality, Cobalt infused, Bi-metal hole saws make quick work when drilling any interior or exterior door. The bits are designed for use with any door material: wood, composite, hollow core, or metal doors. Long-lasting drill guides have a unique built-in metal bushing. The large guide's stepped profile also helps prevent damage and extend the life of the jig. Drill from one side until the pilot tip exits the door, then continue drilling from the other side to prevent tear out.Switch to the 1" hole saw to cross bore the perfect hole for latches.Attach the spacer plate for doors measuring 1-3/8 in., or remove the plate for doors with 1-3/4 in. thickness. The jig also adjusts to 2-3/8 in. and 2-3/4 in. backsets. Most handles and locks are adjustable to either setting. Make sure to measure other hardware in the home to assure uniformity. The LockMatePLUS also includes a dead bolt locator attachment. Before removing the Jig, insert the locator and mark the center for perfectly spaced knobs and locks.

Highlights

Door lock kit self-clamps to door. No screws or hardware and no surface damage

Door lock kit Includes 2-1/8 in. and 1 in. Bi-Metal Cobalt Hole saws

Hole saws cut both wood and metal solid or hollow core doors

Door lock kit has metal lined stepped drill guide bushings to prevent damage and extend life of jig

Door lock kit adjusts for 1-3/8 in. and 1-3/4 in. thick standard doors

Adjusts to both 2-3/8 in. and 2-3/4 in. standard backsets

Compatible with most common lock sizes

Dead Bolt Locator piece perfectly spaces handles and deadbolts

Includes 1/4 in. Pilot bit and mandrel with adaptor to fit both hole saws

Return Policy

California residents

see Prop 65 WARNINGS

Product Information