JBL 306P MkII - Studio Monitor Kit w/ Powered Subwoofer, Cables, and Isolation Pads

This B&H Kit combines a pair of JBL 306P MkII - Powered 6.5" Two-Way Studio Monitors with a JBL LSR310S 200W Powered Subwoofer, a pair XLR cables, a pair of 1/4" cables, a pair of foam speaker platforms, and a subwoofer isolation stabilizer to create the primary components of a professional mixing and mastering monitor set up, for full range music production and broadcast facilities.

The JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor is a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 306P MkII features dual 56W Class-D amplifiers, which power the 6.5" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 47 Hz to 20 kHz with a peak SPL of 110 dB.

The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 306P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 306P MkII ships with a power cord.

The LSR310S 200W Powered Subwoofer from JBL is a 200-watt Class-D subwoofer that has been optimized for use in JBL's 3 Series of speakers. The subwoofer is designed for use in music recording, mix, and post-production 5.1 applications. It features a 10-inch speaker and JBL's Slip Stream Port to provide a peak output of 113 dB.

A selectable Extended Low Frequency (XLF) effect allows you to augment the low frequency response found in many dance clubs, allowing you use the LSR310S to provide a sonic picture of how your tracks will sound at the club. It also has a selectable input sensitivity and 3 crossover settings including 80Hz, XLF (120Hz), and external, allowing the use of an external crossover.

This 10' Roland Gold Series Neutrik XLR-M to XLR-F Balanced Microphone Cable is engineered to accurately transmit audio signals without contamination or noise interference. It features Neutrik connectors with 24k gold-plated contacts ensuring clean, precise audio reproduction. Studio-quality oxygen-free copper core wire translates every tonal nuance with exceptional clarity, and the low-capacitance design ensures that voices and instruments are clear and accurate.

The 10 foot PM-TRS 1/4" TRS Male to 1/4" TRS Male Interconnect Cable from Pearstone features Rean connectors with nickel-plated contacts on both ends, 24-gauge oxygen-free copper conductors, and spiral shielding to protect against EMI and RFI noise. Additionally, twin conductive PVC shields reduce electrostatic noise and provide a clean signal path while retaining good flexibility for those occasions that demand it.

The connector's molded strain relief over metal shells provides excellent durability and allows for increased protection between the OFC conductors and the connectors. The cable is ideal for both live and studio applications, including connecting powered speakers to studio monitor controllers, or connecting synthesizers and outboard gear to mixers, or wherever balanced connections are indicated.

The small IP-S Isolation Pad from Auray is a monitor speaker isolation pad made from high-density acoustic foam. It is designed to decouple your monitor speakers from its resting surface by absorbing the monitor's vibrations. This stops reverberation through the desk or speaker stands, therefore preventing unwanted resonance. Removing these unwelcome vibrations results in greater depth of field, tighter low end and transient response, and a higher level of detail across the frequency spectrum.

The ISO-SUB Subwoofer Isolation Stabilizer from Auray is for improving the sound and resolution of a subwoofer. It is used to reduce vibrations and unwanted resonance that can make a subwoofer sound muddy, and is ideal for home theater, studio, and stereo-system applications.

A sturdy, fabric-covered wooden base with EVA (ethylene-vinyl acetate) padding isolates and stabilizes the speaker, and a high-density acoustic foam decouples the speaker from the floor so low frequencies sound clearer and more focused. The ISO-SUB's design preserves the accuracy and clarity of your subwoofer and decreases the transmission of vibrations to adjacent rooms and other spaces.

User Manual

2.5 MB

JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor

UPC: 691991007712

JBL LSR310S 200W Powered Subwoofer

UPC: 050036904636

Roland Gold Series Neutrik XLR-M to XLR-F Balanced Microphone Cable (10')

UPC: 761294211359

Pearstone PM-TRS 1/4" TRS Male to 1/4" TRS Male Interconnect Cable (10')

UPC: 847628580435

Auray IP-S Isolation Pad for Studio Monitor (Small, Single)

UPC: 847628564152

Auray ISO-SUB Subwoofer Isolation Stabilizer

UPC: 847628597884

• This B&H Kit combines a pair of JBL 306P MkII - Powered 6.5" Two-Way Studio Monitors with a JBL LSR310S 200W Powered Subwoofer, a pair XLR cables, a pair of 1/4" cables, a pair of foam speaker platforms, and a subwoofer isolation stabilizer to create the primary components of a professional mixing and mastering monitor set up, for full range music production and broadcast facilities.