Connect the DJM-250MK2 to your PC/Mac using a single USB cable. The USB connection supports sound input and output, so you can record your mixes to your computer's hard drive
Manufacturer | Pioneer | |
---|---|---|
Specification | ||
Total # Of Channels | 2 | |
Input Connectors | Channel 1\nLine: 2 x RCA\nPhono: 2 x RCA\nChannel 2\nLine: 2 x RCA\nPhono: 2 x RCA\nAux\nLine: 2 x RCA\nMic: 1/4" / 6.35 mm TS\nTurntable ground lug | |
Output Connectors | Master 1: 2 x XLR (L,R)\nMaster 2: 2 x RCA (L,R) | |
Headphone Output | 1 x 1/4" / 6.35 mm TRS stereo\n1 x 1/8" / 3.5 mm TRS stereo | |
USB | Type: B | |
Sample Rate | 48 kHz | |
Bit Depth | 24-bit | |
Frequency Response | Line: 20 Hz to 20 kHz | |
Signal to Noise Ratio | Phono: 80 dB\nLine: 94 dB\nMic: 77 dB\nAux: 90 dB | |
THD | Line - Master 1: 0.005% | |
Output Level | Standard Output Level\nMaster 1: +6 dBu\nMaster 2: +2 dBu\nPhones: +8 dBu\nRated Output Level\nMaster 1: +25 dBu\nMaster 2: +21 dBu | |
Load Impedance | Master 1: 10 kOhms\nMaster 2: 10 kOhms\nPhones: 32 Ohms | |
Output Impedance | Master 1: 1 kOhms or lower\nMaster 2: 390 Ohms or lower\nPhones: 2 Ohms or lower | |
Crosstalk | Line: 90 dB | |
EQ Controls | Channel Isolators\nHi: -∞ to +6 dB (20 kHz)\nMid: -∞ to +6 dB (1 kHz)\nLow: -∞ to +6 dB (20 Hz)\nMicrophone EQ\nHi: 0 dB to -12 dB (10 kHz)\nLow: 0 dB to -12 dB (100 Hz) | |
Power | 100 to 240 VAC, 50 / 60 Hz\nRated Current: 600 mA\nRated Output: 12 VDC, 2 A\nPower Consumption (standby): 0.5 W Power Consumption: 12 VDC, 600 mA | |
Operating Temperature | 41 to 95°F / 5 to 35°C | |
Operating Humidity | 5 to 85% (non-condensation) | |
Dimensions (WxDxH) | 9.1 x 4.2 x 12.6" / 230.0 x 107.9 x 319.5 mm | |
Weight | 6.6 lb / 3.0 kg |