RIDGID NaviTrack Underground Sonde, Remote In-Line Transmitter for Use with Navitrack Scout Locator and SeeSnake Cameras 16728
Set includes bulb auger, "C" cutter, spade cutter and pin key
Makes the toughest drain cleaning jobs easier and hassle-free
Attachments easily connect to K-400 75-ft. kink resistant cable
About This Product
The RIDGID NaviTrack Sonde Remote Line-Transmitter is a powerful, miniaturized transmitter that can be installed at the end of a fiberglass push cable, duct rod, or sewer cable. The NaviTrack Battery Sonde transmits a 512 Hz signal that can be picked up with any compatible locator which allows users to pinpoint the transmitter's position underground. To install the NaviTrack Battery Sonde transmitter onto a push cable, screw the threaded end of the battery cover onto the end of the push cable. Tighten with pliers to ensure sure it does not disconnect or loosen during use. Operates up to 4-hours on 1 AAA size alkaline battery. Simple operation - tighten/loosen the battery cover to turn the transmitter ON/OFF. LED operation/battery status indicator. RIDGID - Built For Those Who Know.
Highlights
Can be attached to a drain cleaning cable or a water jet hose to locate the remote transmitter in a line
Transmits 512 Hz frequency/signal that compatible locators pick up easily
LED operation/battery status indicator when sonde is transmitting
Operates up to 4-hours on 1 AAA size alkaline battery
Typical maximum detection range with navitrack receiver (varies with ambient noise and interference): in air: 25 ft., in cast iron: 15 ft.
Operating range of battery is minus 4°F to 130°F
Typical interference sources: ductile iron, cast iron, wetsalt laden ground
Lifetime warranty: RIDGID tools are warranted to be free of defects in workmanship and material, see manufacture warranty for details
Return Policy
Product Information
| Manufacturer | RIDGID |
|---|