The EPM Series consoles pack a professional feature set in a compact, mobile enclosure
Manufacturer | Other Brands | |
---|---|---|
Specification | ||
Total # Of Inputs | 6x Mono\n2x Stereo | |
Mic/Line Inputs | 6x Line Mono: 1/4" TRS Phone\n2x Line Stereo: L/R 1/4" TRS Phone\n6x Microphone: 3-pin XLR | |
Stereo Line Inputs | 2x Stereo: L/R 1/4" TRS Phone | |
In-Line Inputs/Returns | No | |
AUX Sends | 2x Aux Sends | |
AUX Returns | No dedicated returns | |
Inserts | 1/4" TRS Phone - Mono Inputs, Main Stereo Output | |
BUS (Group) Outputs | Stereo Output Only | |
2 Trk Master I/O | Mix L/R: Stereo Paired L/R RCA Phono | |
ALT I/O | No | |
Monitor Outputs | Monitor: L/R Stereo Paired 1/4" TRS Phone | |
EQ Section | Mono Inputs +/- 15 dB\nLo: 80 Hz\nMid: 150 Hz - 3.5 kHz (swept)\nHi: 12 kHz\nQ: 1.5\nStereo Inputs +/-15 dB\nLo: 80 Hz\nMid: 720 Hz\nHi: 12 kHz | |
Solo/Mute | All Input Channels | |
Channel Level Control | 100 mm Faders | |
Trim/Gain Control | Rotary Potentiometers | |
Phantom Power | +48 V Phantom | |
Metering | 10-Segment L/R Peak LEDs\n+48 V Phantom Power LED\nPFL Active LED\nPower Indicator LED | |
Frequency Response | 20 Hz to 20 kHz +/-1.5 dB | |
Dynamic Range | Not specified by manufacturer | |
Signal-to-Noise Ratio | Noise (22 Hz - 22 kHz measurement bandwidth)\nMic EIN @ max gain, 150 ohms source impedance -127 dBu\nMix @ max, faders to down <-85 dBu | |
Total Harmonic Distortion (THD) | Mic sensitivity 30 dB, +14 dBu @ mix output: <0.02% | |
Power Supply | Integral lightweight switched-mode PS\nAC mains supply: 85-270 V AC, 50/60 Hz universal input\nPower Consumption: Less than 20 W | |
Dimensions (W x H x D) | Not specified by the manufacturer | |
Weight | 11.2 lb (5.1 kg) |