TEKTON Ball End Hex and Star L- Key Set with Holder, 41-Piece (0.050-3/8 in. 1.3-10 mm, T6-T50) KEY91002
Marked with a high-visibility laser marking and a stamped marking
Tolerance is measured in 2 ways to ensure dimensional accuracy
Durable manganese phosphate finish is resistant to corrosion
About This Product
TEKTON 41-pc. Ball End Hex and Star L-Key Set includes the most common in. hex, metric hex, and star key sizes, all stored in durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways-both with a high-visibility laser marking and a stamped marking.
Highlights
High leverage -we designed the keys to be longer in the largest sizes to increase leverage where it matters
Tight fit with fasteners - we precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners
20° ball angle increases access - our l-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength
Maximum torque strength - We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque
Clear markings - with the exception of the smallest sizes, TEKTON L-key sizes are marked in two ways-both with a high-visibility laser marking and a stamped marking (sizes 0.050 in. and 1.3 mm are too small to laser mark, sizes 0.050 in. 1/16 in. 5/64 in. 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)
13-pc. ball end hex L-key wrenches: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.
15-pc. ball end hex L-key wrenches: 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm
13-pc. star L-key wrenches: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50
Black hex key holder
Red hex key holder
Gray star key holder
Return Policy
Product Information
| Manufacturer | TEKTON |
|---|---|
| Set Product as New from Date | Jun 18, 2025 |
| Set Product as New to Date | Jul 17, 2025 |