TEKTON Flat End Hex L-Key Set with Holders, 28-Piece (0.050-3/8 in., 1.3-10 mm) KLX91303

About This Product

The Tekton 28-Piece Flat End Hex L-Key Set includes 0.050-3/8 in. and 1.3-10 mm flat end hex L-keys with holders. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways-both with a high-visibility laser marking and a stamped marking (the 0.050 in. and 1.3 mm keys are too small to laser mark and the 0.050 in., 1/16 in., 5/64 in., 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holders have self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.

Highlights

Tight Fit with Fasteners - We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners

Two Measures of Tolerance Control - We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency

8660 Steel - Our T-handle keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC to produce tools that are hard, but not brittle

Corrosion-Resistant Finish - We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion

Clear Markings - With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking

13-pieces flat end l-keys: 0.050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 in.

15-pieces flat end l-keys: 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm

2-pieces l-key holders: red, black

Return Policy

Product Information