Vanguard Alta Pro 2+ 263AP Aluminum-Alloy Tripod Kit with Alta PH-32 3-Way, Pan-and-Tilt Head

Time-Lapse Tips and Tools

This Alta Pro 2+ 263AP Aluminum-Alloy Tripod Kit from Vanguard supports up to 11.0 lb, measures 29.8" when folded, and includes an Alta PH-32 3-Way, Pan-and-Tilt Head with QS-60 V2 Quick Release Plate. Each of its 3-section legs features an independent spread as well as twist locks for rapid deployment. Together, the three legs can be extended to obtain a maximum height of 56.8", or 69.0" with the center column fully raised. When the center column and the legs are retracted, the tripod kit stands at 28.0". Polymer covers on two of the legs provide a secure, comfortable grip while moving the tripod, and rubber feet help to enhance stability on a wide variety of surfaces.

Cameras or accessories that are compatible with a 1/4"-20 mount can be connected to the QS-60 V2 Quick Release Plate. The quick release plate can be attached or removed from the integrated clamp located at the top of the PH-32 3-Way, Pan-and-Tilt Head by tightening or loosening the clamp's knurled, locking knob. Within the recessed surface between the clamp's jaws is a retaining pin. This pin prevents an installed QS-60 V2 Quick Release Plate from accidentally sliding off when the clamp is opened. The quick release plate features a rubberized, non-slip platform while a bubble level is built-in along the edge of the clamp.

The PH-32 3-Way, Pan-and-Tilt Head can be rotated 360°, and tilted -60° backwards or 90° forwards. For portrait orientation, it offers a sideways +90°/-30° tilt angle. Each of these three movements function independently of each other and can be locked into place.

For added versatility, the center column is connected to the tripod by a fulcrum that enables 90° of upwards or downwards tilt that can be locked into place. Additionally, the center column assembly permits 360° of independent rotation. With the ability to push and pull the center column at all times, those tilt and swivel movements allow the center column to be used as an extendable cross arm or a miniature camera boom. This allows an attached camera to be easily raised toward an elevated subject or over a scene. A camera that is placed toward the end of center column can be positioned perpendicular to the tripod, while the legs can be further lowered for a minimum height of 11.0". The camera can then be extended past the tripod's legs, which is particularly useful for copy stand or macro photography. For subjects along the ground, the center column can also be used to obtain low angles while the tripod's user is positioned comfortably behind the camera.

A nylon carry bag with a draw-string closure and shoulder strap is included for storage or transport.

Garrett Gee

4 years ago

General Use and Handling

Supports up to 11.0 lb

Push-and-pull rapid center column for rapid camera, lens, or sport optic positioning

Can be set to a maximum height of 56.8", or 69.0" with the center column fully raised

Tripod kit stands at 28.0" when the center column and the legs are retracted

For added versatility, the center column is connected to the tripod by a fulcrum that enables up to 90° of upwards or downwards tilt, which allows the legs to be further lowered for a minimum height of 11.0"

Center column can be locked at 0°, 15°, 30°, 45°, 60°, 75° or 90° angles

Center column assembly permits 360° of independent rotation

Tilt, swivel, as well as push-and-pull movements allow the center column to be used as an extendable cross arm or a miniature camera boom

Hexagonal shaft design provides center column with increased torsional rigidity

Aluminum-alloy legs each feature 3 sections, twist locks for rapid deployment, and can be independently spread

Legs can be locked at 20°, 40°, 60, or 80° angles

Polymer covers on two of the legs provide a secure and comfortable grip

Rubber feet help to enhance stability on a wide variety of surfaces

Separately-available metal spikes can supplement included rubber feet for use on surfaces such as soft and uneven soil

Built-in tripod bubble level, ballast loop, and 3/8"-16 female accessory thread for direct attachment of accessories that feature 3/8"-16 mounts

Weighs 5.7 lb, measures 29.8" when folded

3-Way, Pan-and-Tilt Head

Arca-type, 3-way, pan-and-tilt head

Compatible with tripods or support systems that feature a 3/8"-16 mount

Reducer bushing included for compatibility with tripods or support systems that feature a 1/4"-20 mount

Can be rotated 360°, and tilted -60° backwards or 90° forwards

Sideways +90°/-30° tilt angle for portrait orientation

Two independent, user-extendable handles, one for backwards or forwards tilt, and one for sideways tilt

Integrated clamp on top of head is compatible with included QS-60 V2 Quick Release Plate

Built-in bubble level

Integrated retaining pin on the clamp prevents QS-60 V2 Quick Release Plate from accidentally sliding off when the clamp is opened

Durable, aluminum-alloy construction