VIAIR 2 Gal. 12-Volt 200 psi High-Flow Air Source Kit

VIAIR 2 Gal. 12-Volt 200 psi High-Flow Air Source Kit

About This Product

VIAIR High-Flow 200 psi Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 psi-rated 2.0 Gal. air tanks with 5 ports. All 200 psi Air Source kits come with a pre-wired 165/200 psi pressure switch. Both kits not only come with the industry's leading 200 psi compressors but also come with pre-installed drain cock, safety valve, 1/2 in. port compression fitting for 3/8-in. airline. To use, simply connect the pressure switch to fused power, make a solid ground and connect an airline to the compression fitting. A 40 Amp relay and an appropriately-rated fuse are recommended for use with this unit.

Highlights

• Air source kit comes with a VIAIR 480C air compressor which builds 200 psi and has a flow rate of 1.86CFM at 0 head pressure
• Largest VIAIR air source kit for powering air horns just connects your air horn's airline to our system, then follow your air horn wiring diagram
• Vehicle's engine must be running before turning on the compressor
• (Optional) you can also tap into the air tank to use the air source kit as a tire inflator
• Follow the wiring diagram in the instructions or visit our website for the schematic