Werner LEANSAFE 6 ft. Fiberglass Leaning Step Ladder with 300 lb. Load Capacity Type IA Duty Rating L6206
Robust 300 lb. load capacity step ladder for maximum productivity
Can securely lean against a flat wall or be used as a step ladder
Rear rail is latched to front rail and feet are curved to lean
About This Product
The L6206 fiberglass 6 ft. leaning ladder is ideal for the professional. With a duty rating of 300 lbs. it features the LEANSAFE ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard stepladder. LEANSAFE ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a standard step ladder is not an option on a jobsite, so we designed the LEANSAFE ladders with a 2-color design and highly visible LEANSAFE logos to make this ladder easily distinguishable from a standard stepladder. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner's patent pending single latch design stays engaged when needed, and is centrally located to easily open and close. Anchoring the ladder is the EDGE360 bracing to protect the bottom of the ladder. LEANSAFE ladder front feet have curved non-marring rubber foot pads that maximize the surface area in both the step ladder and leaning ladder modes. Available in 4, 6, 8, 10, and 12 ft. heights. Built with a 300 pound duty rating this L6200 series ladder provides the professional contractor a single ladder that works as an improved standard stepladder and leaning ladder to safely get closer to your work.
Highlights
LEANSAFE ladder top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
Dropped rear rail pivot point gets ladder closer to your work
Color and branding differentiates LEANSAFE from standard stepladders
Rail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning mode
Curved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder mode
Double riveted slip-resistant TRACTION-TRED steps
Back-up plates reinforce all top connectors
Heavy duty internal spreaders
Full set of rear horizontals spaced 1 per foot
EDGE360 bracing protects the ladder feet from every angle
Every rivet backed up by metal, metal plates or washers to protect rails
6 ft. LEANSAFE leaning ladder in stepladder mode has a maximum standing height of 3.10 ft. and a maximum reach height of 10 ft.
6 ft. LEANSAFE leaning ladder in leaning mode has a maximum standing height of 2.10 ft. and a maximum reach height of 9 ft.
Return Policy
Product Information
Internet # 302747829
Model # L6206
Additional Resources
Return Policy
| Manufacturer | Werner |
|---|