Yamaha MG10 - 10-Input Mixer
- 4x Mic/Line Combo Inputs
- 6x 1/4" Line Inputs
- XLR and TRS 1/4" Stereo Outs
- TRS Monitor Outs
Lease to Own at
est. $15 /week*
SKU
MG10
Aux level on each channel feed to TRS aux send for routing to devices such as reverb units
| Manufacturer | Yamaha | |
|---|---|---|
| Specification | ||
| Phantom Power | +48 V switchable, channels 1 - 4 | |
| Input Channels | 4x mono [mic/line]\n3x stereo [line] | |
| Output Channels | 2x stereo out\n1x monitor out\n1x headphone out\n1x aux out | |
| Bus | Stereo: 1\nAUX[FX]: 1 | |
| Pad | 26 dB (mono channels) | |
| HPF | 80 Hz, 12 dB/oct (mono channels) | |
| Compressor | Threshold: +22 dBu to -8 dBu\nRatio: 1:1 to 4:1\nOutput level: 0 dB to 7 dB\nAttack time: approx. 25 msec\nRelease time: approx. 300 msec | |
| Equalizer | EQ high gain: +15 dB/-15 dB, Frequency: 10 kHz shelving\nEQ mid gain: +15 dB/-15 dB, Frequency: 2.5 kHz peaking\nEQ low gain: +15 dB/-15 dB, Frequency: 100 Hz shelving | |
| LED | Peak LED turns on when post EQ signal reaches 3 dB below clipping | |
| Level Metering | 2 x 7-segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB] | |
| Total Harmonic Distortion | 0.02% @ +14 dBu (20 Hz to 20 kHz), GAIN knob: Min, 0.003% @ +24 dBu (1 kHz), GAIN knob: min | |
| Frequency Response | +0.5 dB/-1.0 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: min | |
| Equivalent Input Noise | -128 dBu (mono input channel, Rs: 150 Ω, GAIN knob: max) | |
| Residual Output Noise | -102 dBu (STEREO OUT, STEREO LEVEL knob: min) | |
| Crosstalk | -83 dB | |
| Power Requirement | PA-10 (AC 38 VCT, 0.62A, Cable length = 3.6 m) or equivalent recommended by Yamaha | |
| Power Consumption | 22.9 W | |
| Dimensions | 9.6 x 2.8 x 11.6" (244 x 71 x 294 mm) | |
| Net Weight | 4.19 lb (1.9 kg) |
Write Your Own Review