VIAIR 2 Gal. 200 psi 12-Volt Fast-Fill Air Source Kit
(4.4)
- VIAIR Fast-Fill 200 psi Air Source Kits come with a powerful, low amp-draw 380-degreeC VIAIR compressor mounted on a 200 psi-rated 2.0 Gal. air tank with 5 ports. All 200 psi Air Source kits come with a pre-wired 165/200 psi pressure switch. Both kits not only come with the industry’s leading 200 psi compressors but also come with a drain cock, safety valve, 1/2 in. port compression fitting for 3/8 in. airline pre-installed. To use, simply connect the pressure switch to fused power, make a solid ground and connect an airline to the compression fitting. A 40 Amp relay and an appropriately-rated fuse are recommended for use with this unit.
Lease to Own at
est. $20 /week*
Availability: In stock
SKU
20007
Product Overview
VIAIR High-Flow 200 psi Air Source Kits come with a powerful, low amp-draw 480-degreeC VIAIR compressor mounted on a 200 psi-rated 2.0 Gal. air tanks with 5 ports. All 200 psi Air Source kits come with a pre-wired 165/200 psi pressure switch. Both kits not only come with the industry’s leading 200 psi compressors but also come with a drain cock, safety valve, 1/2 in. port compression fitting for 3/8-in. airline pre-installed. To use, simply connect the pressure switch to fused power, make a solid ground and connect an airline to the compression fitting. A 40 Amp relay and an appropriately-rated fuse are recommended for use with this unit.
- Air source kit comes with a VIAIR 480-degreeC air compressor which builds 200 psi and has a flow rate of 1.76CFM at 0 head pressure
- Largest VIAIR air source kit for powering air horns just connects your air horn's airline to our system, then follow your air horn wiring diagram
- Vehicle's engine must be running before turning on the compressor
- (Optional) you can also tap into the air tank to use the air source kit as a tire inflator
- Follow the wiring diagram in the instructions or visit our website for the schematic
- California residents see Prop 65 WARNINGS